Wen YTL23308 22Ton Log Splitter Manual do Utilizador

REV071411 YTL23308 22 TON LOG SPLITTER Instruction & Assembly SAVE THESE INSTRUCTIONS FOR FUTURE

- 10 - STEP 8: Attach Wheel Fenders 1. Attach the wheel fenders (#72 & #74) to each side of the oil tank using M10x30 hex bolt (#73), Ø10 flat

- 11 - STEP 10: Add Engine Oil 1. Make sure the log splitter is on a level surface. 2. Remove oil fill cap/dipstick to add oil. 3. Refer to the

- 12 - STEP 12: Add Hydraulic Oil 1. The log splitter needs to be on a flat, level surface before adding the hydraulic oil. 2. Remove the oil c

- 13 - WARNING Before operating or using the log splitter, review the instructions below and all safety information. Failure to follow these

- 14 - 6. The log splitter must have at least seven feet of clearance from combustible material. It needs to be on a dry and level surface with goo

- 15 - 11. Load a log onto the beam against the endplate (Max Log Length-24”) 12. Make sure hands are clear from the wedge and

- 16 -

- 17 - WARNING Improper maintenance and storage of the log splitter may void your warranty. MAINTENANCE  Before performing maintenance, the l

- 18 - Problem Cylinder rod will not move SOLUTION: A,D,E,H,J Slow cylinder rod speed when extending or retracting SOLUTION: A,B,C,H,I,K,L Woo

- 19 - Ram Force ... 22 Ton Cycle Time ...

- 2 - Table of Contents General Warnings and Rules ... 3 Hazard Sig

- 20 - Parts Drawing & Parts List

- 21 - Ref# Description Qty Ref# Description Qty 1 Beam 1 38 Flange Assembly 2 2 Bolt M12x55 10 39 Oil Tank 1 3 Flat Washer Ø12 18 40 Bolt M12x90

- 22 - Ref# Description Qty Ref# Description Qty 75 Bolt M6x20 6 88 Hexagon Thin Slotted and Castle Nuts M20x1.5 2 76 Lock Washer Ø6 6 89 Adjusta

- 23 - Warranty For one year from the date of purchase YTL International will replace for the original purchaser, or repair the log splitter.

- 3 - GENERAL WARNINGS READ and UNDERSTAND this manual completely before using 22 Ton Log Splitter. Operator must read and understand all sa

- 4 - Hazard Signal Word Definitions ABOUT YOUR 22 TON LOG SPLITTER This hydraulic log splitter has a heavy-

- 5 - Read this owner’s manual before operating the equipment. Familiarize yourself with the location and function of the controls and featu

- 6 - CAUTION Read and follow all instructions for assembly and operation. Failure to properly assemble this equipment could result in serious in

- 7 - STEP 2: Attach Front Support Leg to Tow Bar 1. Fix the Front support leg (#62) to the tow bar (#30) and secure using a pin (#42) and hand wh

- 8 - STEP 4: Assemble Rear Support Leg 1. Attach the rear support leg (#34) to the tow bar using M10x75 hex bolt (#36), Ø10 flat washer (#56) and

- 9 - STEP 6: Attach Engine and Pump 1. Attach the engine (#53) to the oil tank using M8x75 hex bolt (#48), Ø8 flat washer (#45), Ø8 lock washer